|FA136033||How to program the Altivar 71 drive for the reference by modbus and command by logic input LI1.|
Below is the programming parameter setting for the Reference by Modbus and command by LI1:-
Fr1 => [Modbus] (Mdb)
CHCF => [Separate] (SEP)
|FA136031||Is it possible to maintain the some speed, if the modbus cable is disconnected or broken from the Altivar 71 drive.|
Yes, it is possible to maintain the some speed by the drive in case of the modbus cable is disconnected
or broken by below setting.
|FA134631||What is the default IP Address of the Modicon M258 controlller.|
When Modicon M258 controller is straight out of the packaging box, the default IP address is
10.10.x.y (Where x and y are the last two places from...
|FA12144||How to connect external potentiometer in Altivar 31 drive.|
You have to program the parameter Frequency Reference 1(Fr1) = AI1 in Control menu (CtL) for potentiometer. Refer to the attached file for potentiometer...
|FA27930||How can I create and modify a password in a ZELIO LOGIC SR2 and SR3?|
Entering the password
Go to: CONFIGURATION menu, PASSWORD section
Initially, the key is not displayed and each digit is set to 0. The message ENTER...
|FA22735||I don't like the tone of the audible module (buzzer) of the XVPC signal towers. Do you have other versions?|
The audible signaling units (buzzers) on XVPC signal towers are supplied with the option to choose one of 10 tones.
Method for changing the factory-set...
|FA22711||What mounting tips can you give for single beam polarised reflex type detectors with the mute function connected to an XPSCM11|
Summary of the mute function of an XPSCM Preventa module:
The Preventa XPSCM module mute mechanism allows materials to be transported across the...
|FA22710||What mounting tips can you give for single beam proximity detectors with the muting function connected to an XPSCM1144?|
Summary of the muting function of an XPSCM Preventa module:
The XPSCM Preventa module muting mechanism allows materials to be transported across...
|FA22654||What is the significance of two arrows on the knob of Tesys GV3P Current Setting Dial.|
The first black arrow needs to be set at the rated current of Motor, when Tesys GV3 MPCB is used with contactor separately mounted or not used at...
|FA142349||Do we have any retrofit accessory that converts extended rotary handle GV2AP01 to GV2APN01.|
The GV2APN01 is the extended rotary handle for GV2P/L series of MPCB. The GVAPP1 is the retrofit accessory that
converts GV2AP01 to GV2APN01.