|FA168468||How can I configure Menu in the tab style template.|
Page menus in the tab style templates are defined using the Menu Configuration dialog. For tab templates the fields have the following properties:
|FA168467||Report using Report Development Tool of VJH 4.3 ,The report looks fine when viewed on any of the browsers, but when we use ‘export to PDF’ option, the appearance of the report gets changed.|
You need to change the Page Size of the report in Format report . Change the report Width, height will be automatically adjusted
according to the...
|FA168466||We frequently need to view the Trends from the trends backup files inside the Vijeo Citect project. The backup files are the trends files moved from the trend folder into a backup folder.|
To view trend data in Vijeo Citect runtime, you need to add the trend files in Citect with help of the " TrnAddHistory " function available .
|FA168465||How I can communicate Messung`s Nexgen series PLC with Vijeo Citect using Ethernet & Serial driver.|
For communicating Messung PLC with Vijeo Citect, there is no special driver
available in Vijeo Citect. You need to confirm from the PLC user manuals...
|FA168464||Does Altivar 212 has options of Ethernet card for communication.|
Altivar 212 doesnot have Ethernet card as an option. However you can use ethernet gateways for communication devices on Ethernet protocol.
|FA168463||How to make factory default the Altivar 312 drive.|
In the menu drC [Motor Control]:
FCS [Return to factory defaults] :Ini
Press ENT button on the HMI for 2 seconds until NO appears on...
|FA168462||How we can run Altivar 312 drive without motor load.|
Configure following parameter
FLt (Fault menu) OPL (Output phase loss)= NO.
By setting above parameter, you can check drive without physical connection...
|FA168244||What is the use of Automatic adaptation of deceleration ramp parameter on Altivar 312 drive.|
This function is used to automatically adapt the deceleration ramp if the initial setting is too low for the inertia of the load connected.
|FA168243||What is the meaning of 1:100 speed range in Altivar 71 drive.|
Speed range is the ratio of the output maximum frequency/minimum frequency where the nominal torque is available.
Example: For a 50Hz motor
|FA168242||What is the options of braking resistor for Altivar 71 range.|
Refer to attached file forthe part number of braking resistor for Altivar 71 range.