| FA168470 | Where did I find the Citect.ini file in my Windows 7 system. The citect.ini files in a Windows 7 System will be found in the given below location.
C:\ProgramData\Schneider Electric\Vijeo Citect 7.20\Config
|
| FA168464 | Does Altivar 212 has options of Ethernet card for communication. Altivar 212 doesnot have Ethernet card as an option. However you can use ethernet gateways for communication devices on Ethernet protocol. |
| FA168243 | What is the meaning of 1:100 speed range in Altivar 71 drive. Speed range is the ratio of the output maximum frequency/minimum frequency where the nominal torque is available.
Example: For a 50Hz motor
Altivar... |
| FA168242 | What is the options of braking resistor for Altivar 71 range. Refer to attached file forthe part number of braking resistor for Altivar 71 range. |
| FA168009 | Can the GV3 range MPCB be operated by a door interlockable external handle. Yes, it is possible by using of the GV3AP01 & GV3AP02. |
| FA168008 | Is the terminal shield used in Compact NS range MCCb compatible with NSX range of MCCB. Terminal shields are fully compatible between the Compact NS and Compact NSX ranges. |
| FA168007 | Is it possible to connect a 3 Pole Compact NSX breaker to use for single phase application. If you need to protect a single phase with a NSX in 3P you can connect the load (phase 1) to the pole 1 and
the load (neutral) to the pole 3. Pole... |
| FA168006 | Is it possible to use the Compact NS plug-in base with Compact NSX plug breaker. Compact NS base can be used for Compact NSX circuit breaker, but reverse is not possible.
The plug-in base:
> Of a Compact NS may be used for Compact... |
| FA168005 | What is the power consumption for Micrologic 5 or Micrologic 6 used with Compact NSX range MCCB. For micrologic 5/6, the power consumption typical value is 30 mA for 24Vdc. |
| FA167818 | What are the part numbers of line choke for Altivar 312 range. Refer to attached file for the part numbers of line choke for Altivar 312 range. |