Main range of productAltistart 22 product or component typeSoft starter product destinationAsynchronous motors product specific applicationPumps and fans component nameATS22 network number of phases3 phases [Us] rated supply voltage230...440 V - 15...10 % motor power kW160 kW 400 V160 kW 440 V90 kW 230 V factory setting current285 A power dissipation in W150 W for standard applications utilisation categoryAC-53A type of startStart with torque control (current limited to 3.5 In) IcL starter rating320 A for connection in the motor supply line for standard applications IP degree of protectionIP00 Complementary assembly styleWith heat sink function availableInternal bypass supply voltage limits195…484 V supply frequency50...60 Hz - 10...10 % network frequency45...66 Hz device connectionTo the motor delta terminalsIn the motor supply line [Uc] control circuit voltage230 V - 15...10 % 50/60 Hz control circuit consumption20 W discrete output number2 discrete output typeRelay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/ORelay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O minimum switching current100 mA at 12 V DC (relay outputs) maximum switching current5 A 250 V AC resistive 1 relay outputs5 A 30 V DC resistive 1 relay outputs2 A 250 V AC inductive 0.4 20 ms relay outputs2 A 30 V DC inductive 7 ms relay outputs discrete input number3 discrete input type(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm discrete input voltage24 V <= 30 V discrete input logicPositive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA output current0.4...1 Icl adjustable PTC probe input750 Ohm communication port protocolModbus connector type1 RJ45 communication data linkSerial physical interfaceRS485 multidrop transmission rate4800, 9600 or 19200 bps installed device31 protection typePhase failure: lineThermal protection: motorThermal protection: starter markingCE type of coolingForced convection operating positionVertical +/- 10 degree height425 mm width206 mm depth299 mm net weight33 kg Motor power range AC-355…100 kW at 200…240 V 3 phases110…220 kW at 380…440 V 3 phases motor starter typeSoft starter Environment electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2Damped oscillating waves level 3 conforming to IEC 61000-4-12Electrostatic discharge level 3 conforming to IEC 61000-4-2Immunity to electrical transients level 4 conforming to IEC 61000-4-4Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3Voltage/current impulse level 3 conforming to IEC 61000-4-5 standardsEN/IEC 60947-4-2 product certificationsULCCCC-TickCSAGOST vibration resistance1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-61.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27 noise level56 dB pollution degreeLevel 2 conforming to IEC 60664-1 relative humidity0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 ambient air temperature for operation-10…40 °C (without)40…60 °C (with current derating 2.2 % per °C) ambient air temperature for storage-25…70 °C operating altitude<= 1000 m without> 1000...< 2000 m with current derating of 2.2 % per additional 100 m Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
Documents & DownloadsLanguage
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD file (on TraceParts) for ATS22C32Q: soft starter-ATS22-control 220V-power 230V(90kW)/400...440V(160kW) (Version 2.0)CertificateSizeAdd to My DocumentsDTM filesSizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.