TeSys D contactor - 4P(2 NO + 2 NC) - AC-1 - <= 440 V 125 A - 32 V DC coilShow more characteristics >
Main rangeTeSys product nameTeSys D product or component typeContactor device short nameLP1D contactor applicationResistive load utilisation categoryAC-1 poles description4P power pole contact composition2 NO + 2 NC [Ue] rated operational voltagePower circuit: <= 1000 V AC 25...400 HzPower circuit: <= 300 V DC [Ie] rated operational current125 A (at <60 °C) at <= 440 V AC AC-1for power circuit [Uc] control circuit voltage36 V DC coil typeWide range [Uimp] rated impulse withstand voltage8 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current125 A (at 60 °C)for power circuit Irms rated making capacity1100 A at 440 Vfor power circuit conforming to IEC 60947 rated breaking capacity1100 A at 440 Vfor power circuit conforming to IEC 60947 [Icw] rated short-time withstand current135 A 40 °C - 10 minfor power circuit320 A 40 °C - 1 minfor power circuit640 A 40 °C - 10 sfor power circuit990 A 40 °C - 1 sfor power circuit associated fuse rating200 A gG at <= 690 V coordination type 1for power circuit160 A gG at <= 690 V coordination type 2for power circuit average impedance0.8 mOhm - Ith 125 A 50 Hzfor power circuit [Ui] rated insulation voltagePower circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedPower circuit: 1000 V conforming to IEC 60947-4-1 electrical durability0.8 Mcycles 125 A AC-1 at Ue <= 440 V power dissipation per pole12.5 W AC-1 safety coverWithout mounting supportRailPlate standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsBVCCCCSADNVEACGLLROS (Lloyds register of shipping)UL connections - terminalsControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endPower circuit: connector 1 cable(s) 4…50 mm²flexible without cable endPower circuit: connector 2 cable(s) 4…25 mm²flexible without cable endPower circuit: connector 1 cable(s) 4…50 mm²flexible with cable endPower circuit: connector 2 cable(s) 4…16 mm²flexible with cable endPower circuit: connector 1 cable(s) 4…50 mm²solid without cable endPower circuit: connector 2 cable(s) 4…25 mm²solid without cable endControl circuit: screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end tightening torqueControl circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmControl circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2Power circuit: 9 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mmPower circuit: 9 N.m - on connector hexagonal 4 mm operating time6...20 ms opening20...35 ms closing safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability4 Mcycles maximum operating rate3600 cyc/h 60 °C Complementary coil technologyWithout built-in suppressor module control circuit voltage limits0.1...0.3 Uc 55 °C drop-out DC0.75...1.2 Uc 55 °C operational DC time constant75 ms inrush power in W22 W at 20 °C hold-in power consumption in W22 W at 20 °C Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation-5…60 °C ambient air temperature for storage-60…80 °C permissible ambient air temperature around the device-40…70 °C at Uc operating altitude3000 m without derating fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open: 2 Gn, 5...300 HzVibrations contactor closed: 3 Gn, 5...300 HzShocks contactor open: 8 Gn for 11 msShocks contactor closed: 10 Gn for 11 ms height127 mm width96 mm depth196 mm net weight2.91 kg Contractual warranty Warranty18 months
Documents & DownloadsLanguage
CatalogueSizeAdd to My DocumentsTeSys catalogue - 2019 - 2020 - chapter B8 contactors TeSys SK,K, D, SKGC, GC, GY,GF (Version 7.0)Control Panel Technical Guide - How to quickly design optimized contactor assemblies (Version 1.1)CertificateSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.