photo-electric sensor - XUK - emitter - 12..24VDC - cable 10mShow more characteristics >
Main range of productOsiSense XU series nameGeneral purpose single mode electronic sensor typePhoto-electric sensor transmitter sensor nameXUK sensor designCompact 50 x 50 detection systemThru beam materialPlastic supply circuit typeDC wiring technique3-wire electrical connectionCable cable length10 m product specific application- emissionInfrared thru beam [Sn] nominal sensing distance30 m thru beam need a receiver Complementary enclosure materialPBT lens materialPMMA maximum sensing distance45 m thru beam add on inputTest by emission breaking wire insulation materialPVC status LED1 LED (green) for supply on [Us] rated supply voltage12...24 V DC with reverse polarity protection supply voltage limits10...36 V DC switching capacity in mA<= 100 mA (overload and short-circuit protection) switching frequency<= 250 Hz voltage drop<= 1.5 V (closed state) current consumption<= 35 mA (no-load) delay first up<= 15 ms delay response<= 2 ms delay recovery<= 2 ms setting-upWithout sensitivity adjustment depth50 mm height50 mm width18 mm Environment product certificationsCECSAUL ambient air temperature for operation-25...55 °C ambient air temperature for storage-40...70 °C vibration resistance7 gn, amplitude = +/- 1.5 mm (f = 10...55 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 11 ms) conforming to IEC 60068-2-27 IP degree of protectionIP65 double insulation conforming to IEC 60529 Contractual warranty Warranty period18 months
Documents & DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaWiring SchemesTransmitterBN :BrownBU :BlueVI :Violet
- not connected: beam made
- connected to -: beam broken
Performance CurvesDetection Curves